Automated brazing.AB-1 induction-heating system provides open-air brazing brazing, method of joining metal parts using nonferrous filler metals with high melting points such as copper, silver, and aluminum alloys. Brazing differs from soldering (see solder) by using a higher temperature; and unlike welding, the parts are not melted. in a lean manufacturing Lean manufacturing is the production of goods using less of everything compared to mass production: less human effort, less manufacturing space, less investment in tools, and less engineering time to develop a new product. environment. Brazing cycle times are less than 20 seconds per part, as fast as three seconds per part--4,800 parts per hour. The system configures with up to three brazing stations--depending on process requirements--as well as robotic part loading and unloading Unloading Selling securities or commodities whose prices are dropping to minimize loss. . Front panel start/stop push buttons place the system in a PLC-controlled auto-run mode with full manual control available for process development. With a compact 5'x6' footprint, the unit is completely self-contained with a built-in water-to-air heat exchanger heat exchanger Any of several devices that transfer heat from a hot to a cold fluid. In many engineering applications, one fluid needs to be heated and another cooled, a requirement economically accomplished by a heat exchanger. . Induction Atmospheres [ILLUSTRATION OMITTED] www.rsleads.com/610mn-225 or Circle 225 for more information |
|
||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion