Printer Friendly
The Free Library
14,715,988 articles and books
Member login
User name  
Password 
 
Join us Forgot password?

Ask the SCSI Expert.


Visit the SCSI SCSI
 in full Small Computer System Interface

Once common standard for connecting peripheral devices (disks, modems, printers, etc.) to small and medium-sized computers. SCSI has given way to faster standards, such as Firewire and USB.
 Trade Association's web site (www.scsita.org) to ask the SCSI Expert a question.

Q: I'm a software developer. I have an application which queries SCSI devices to gather configuration/asset information.

How do I query a SCS1 device to determine the device's bus speed? I can't find any mention of this in any of the SCSI-3 standards documents. Actually, I don't see any reference to "Ultra" or "Ultra2" or "Ultra160" in any of the SCSI3 standards on www.t10.org.

A: Ultra SCSI The designation for various high-speed SCSI interfaces. The original specification was Ultra SCSI, followed by Ultra2, Ultra3, etc. For details, see SCSI. , Ultra2 SCSI, and Ultra160 SCSI are the marketing names for the standards.

Following is the data that you need:

Ultra320 SCSI = SPI-4 Fast160 Paced data transfer = 6.25 ns

Ultra160 SCSI/Ultra3 SCS1 = SPI-3 Fast-80DT = 12.5 ns

Ultra2 SCSI = SPI-2 Fast-40 = 25 ns

Ultra SCSI = Fast-20 (Use SPI-2) = 50 ns

Wide Fast SCSI = Fast (Use SPI-2) = 100 ns Calculate transfer period)

Fast SCSI = SPI (1) (Stateful Packet Inspection) See stateful inspection.

(2) (Service Provider Interface) The programming interface for developing Windows drivers under WOSA.
 t Use SPI-2) = 100 ns (Calculate transfer period)

SCSI = SCSI-2 /Asynchronous- Narrow)

See the SPI-4 (Revision 7) table 5 for the Transfer period.

Q: We have a cable with the following printed on it: "E119932 AWM 2919 80C 30V VW-1 LOW VOLTAGE COMPUTER CABLE COPARTNER copartner n. one who is a member of a partnership. The prefix "co" is a redundancy, since a partner is a member of partnership. The same is true of the term "copartnership." (See: partner, partnership)


COPARTNER.
."

Does this mean that it only works for LVD See LVDS.

LVD - Low Voltage Differential
 devices? We have a SpectraLogic Gator/64000 (HVD (1) (High Voltage Differential) See SCSI and differential signaling.

(2) (Holographic Versatile Disc) A high-capacity optical disc from the HVD Forum (www.hvd-forum.
) tape library that we want to connect to an IBM (International Business Machines Corporation, Armonk, NY, www.ibm.com) The world's largest computer company. IBM's product lines include the S/390 mainframes (zSeries), AS/400 midrange business systems (iSeries), RS/6000 workstations and servers (pSeries), Intel-based servers (xSeries)  RS/6000 with a PCI (1) (Payment Card Industry) See PCI DSS.

(2) (Peripheral Component Interconnect) The most widely used I/O bus (peripheral bus).
 Differential Ultra SCSI (Type 4-L) adapter (IBM Feature Code 6207). Would this cable cause as any problems connecting this system ?

A: The labeling on the cable is for UL certification purposes. Low voltage computer cable means that you cannot use the cable for applications over 30 volts at 80 degrees C, and it has nothing to do with SCSI. If this is a SCSI cable, then it should work fine for connecting HVD SCSI devices.

Q: How does a feed-through terminator work?

A: A feed-through terminator is used on the last bus connection. This type of terminator has both a male and a female connector, and is inserted between the last device and the cable.

It is normally used with scanners and low-end devices that do not need to have termination in the device.

I've seen demo cards for termination--for Multimode LVD/SE but no products. Normally on multimode, the termination is built into the cable assembly. This is typically done on the internal, "twist and fiat" cables. The last fiat will have both a 68-pin connector and a terminator that damps onto the cable with IDC (insulation Displacement connector) like the other connectors on the twist and flat cable.) in the "About SCSI" page. Select "Terms and Terminology" which has the speed, the interface and the corresponding cable lengths.

For the relatively newer LVD SCSI standards such as Ultra2. Ultra3, Ultra160 and Ultra320 SCSI it is easy---point-to-point 25 meters, multidrop 12 meters.

www.scita.org
COPYRIGHT 2002 West World Productions, Inc.
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2002, Gale Group. All rights reserved. Gale Group is a Thomson Corporation Company.

 Reader Opinion

Title:

Comment:



 

Article Details
Printer friendly Cite/link Email Feedback
Title Annotation:Tape/Disk/Optical Storage
Publication:Computer Technology Review
Date:Feb 1, 2002
Words:475
Previous Article:Tape vs. disk: another view.(Tape/Disk/Optical Storage)
Next Article:Multiple DVD formats here to say.(Tape/Disk/Optical Storage)



Related Articles
SANs Are Here.(Technology Information)
Tape and Backup Issues In Storage Area Networks.(Technology Information)
The straight skinny on disk vs. tape pricing; tip: you may be surprised.(Buyers Guide)
Serial ATA: opening new markets for ATA RAID. (Serial ATA).
What drives your data center? Creating graded pools of storage with serial attached SCSI. (Tape/Disk/Optical Storage).
With new rack-mount storage products, Gateway provides life preservers for organizations drowning in data.(Gateway 850 SCSI JBOD subsystem and...
AIT Tape: best long-term replacement for archival Magneto-Optical.(Backup/Restore)
Exabyte announces first AutoPak 1x10, 2U autoloader shipments.
CryptoStor secures vital data.(Security)
Hitachi Demonstrates 3Gbit/s SAS Data Transfer Using Fully Integrated Hard Disk Controller.

Terms of use | Copyright © 2009 Farlex, Inc. | Feedback | For webmasters | Submit articles