Printer Friendly
The Free Library
14,716,498 articles and books
Member login
User name  
Password 
 
Join us Forgot password?

Applied Materials Leads the Advancement of RTP with New XEplus System.


SANTA CLARA Santa Clara, city, Cuba
Santa Clara (sän`tä klä`rä), city (1994 est. pop. 217,000), capital of Villa Clara prov., central Cuba.
, Calif.--(BUSINESS WIRE)--Aug. 25, 1998--

RTP (1) (Rapid Transport Protocol) The protocol used in IBM's High Performance Routing (HPR) system.

(2) (Realtime Transport Protocol) An IP protocol that supports real time transmission of voice and video.
 XEplus(TM) Centura(R) Doubles Temperature Ramp Rate, Provides

Precise Temperature Control to Enable High Throughput

Ultra-Shallow Transistor Junction Formation

Applied Materials Applied Materials, Inc. NASDAQ: AMAT (HKSE: 4336 ) is the global leader in nanomanufacturing technology solutions with a broad portfolio of innovative equipment, service and software products for the fabrication of semiconductor chips, flat panel solar displays, solar , Inc. announced the RTP XEplus Centura, a new rapid thermal processing Rapid Thermal Processing (or RTP) refers to a semiconductor manufacturing process which heats silicon wafers to high temperatures (up to 1200 C or greater) on a timescale of several seconds or less.  (RTP) system that delivers the accelerated temperature ramp rates and precise temperature control required to optimize the electrical performance of sub-0.18 micron device structures. Extending the industry-leading capabilities of the company's RTP XE Centura, the new system enables the formation of ultra-shallow transistor junctions as well as other advanced applications such as critical thin gate dielectrics.

At sub-0.18 micron design rules, virtually all chip makers are expected to design transistors with ultra-shallow (less than 600 angstrom angstrom (ăng`strəm), abbr. Å, unit of length equal to 10−10 meter (0.0000000001 meter); it is used to measure the wavelengths of visible light and of other forms of electromagnetic radiation, such as ultraviolet ) junctions to increase device performance. The RTP XEplus uniquely addresses the major challenges in creating these junctions by delivering a precisely controlled, uniform temperature ramp rate of up to 150 degrees C per second. Enabling a critical "spike anneal To take the brittleness out of metal, plastic or certain carbon composites. Performed in the preparation of new products or in their restoration, annealing is accomplished via a heat treating process. ," the XEplus exposes the wafer to the target temperature for less than one second before cooling, thus maximizing dopant dopant

Any impurity added to a semiconductor to modify its electrical conductivity. The most common semiconductors, silicon and germanium, form crystalline lattices in which each atom shares electrons with four neighbours (see bonding).
 activation while minimizing the diffusion of dopants into unwanted areas of the device.

"Customers are excited about this new capability, since it provides innovative, enabling technology to meet their future design strategies," said Dr. Chris Gronet, vice president of Applied Materials' Thermal Processing Organization. "In addition to supporting next-generation applications such as ultra-shallow junctions and thin gate dielectrics, the RTP XEplus also sets new standards in process uniformity and reduced cost of ownership. For example, maximum system throughput has been increased to more than 110 wafers per hour."

To meet stringent control requirements for sub-0.18 micron process technology, the XEplus features unmatched temperature control capability of 3 degrees C, 3 sigma -- independent of wafer emissivity Emissivity

The ratio of the radiation intensity of a nonblack body to the radiation intensity of a blackbody. This ratio, which is usually designated by the Greek letter ε, is always less than or just equal to one.
. Key to maintaining uniformity is the system's unique, closed-loop, multi-point temperature control which monitors temperature variations across the wafer in real time to constantly adjust the system's patented Honeycomb honeycomb

a mosaic of closely packed units with depressed centers giving a honeycomb appearance.


honeycomb ringworm
see favus.

honeycomb stomach
reticulum.
 Lamp Array.

The process results of the XEplus can be efficiently transferred from system to system using the company's innovative TempMatch(TM) calibration tool. The TempMatch tool provides temperature matching capability to better than +/-1.75 degrees C between chambers and systems without recipe modification. New OptiZone(TM) software featured on the RTP XEplus automatically fine-tunes the system for optimal process uniformity, thus reducing the number of wafers needed for system setup or requalification and lowering system cost.

According to according to
prep.
1. As stated or indicated by; on the authority of: according to historians.

2. In keeping with: according to instructions.

3.
 research firms Dataquest and VLSI VLSI: see integrated circuit.


(1) (Very Large Scale Integration) Between 100,000 and one million transistors on a chip. See SSI, MSI, LSI and ULSI.

(2) (VLSI Technology, Inc., Tempe, AZ, www.semiconductors.
 Research, Applied Materials has been the industry's leading supplier of RTP systems for the last two years, with more than 50 percent market share in 1997. Introduced in mid-1995, the RTP Centura quickly captured the market with its unique temperature measurement and control capability. Dataquest estimates the RTP market in 1998 at $251 million and anticipates it to grow to more than $688 million by 2003.

The RTP XEplus Centura system will begin shipping in October. The XEplus enhancements will be available as a new system or as an upgrade to Applied Materials RTP XE Centura chambers.

Applied Materials, Inc. is a Fortune 500 global growth company and the world's largest supplier of wafer fabrication systems and services to the global semiconductor industry. Applied Materials is traded on the Nasdaq National Market System under the symbol, 'AMAT.' Applied Materials' Web site is http://www.AppliedMaterials.com.

CONTACT: Applied Materials

Connie Duncan, 408/563-6209 (editorial/media)

Carolyn Schwartz, 408/748-5227 (financial community)
COPYRIGHT 1998 Business Wire
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 1998, Gale Group. All rights reserved. Gale Group is a Thomson Corporation Company.

 Reader Opinion

Title:

Comment:



 

Article Details
Printer friendly Cite/link Email Feedback
Publication:Business Wire
Date:Aug 25, 1998
Words:569
Previous Article:Applied Materials Introduces Ultra-Shallow Junction Module to Enable GigaHertz-Generation Devices.
Next Article:Dollar General Announces 5-For-4 Stock Split.
Topics:



Related Articles
More on that new polyphthalamide.
New alternatives in conductive plastics.
Here's Another Source of Laser-Markable Compounds.(RTP Co. launches plastics.)(Brief Article)
LNP Wins a Round in Long-Fiber Patent Case.
New FR Versions of Long-Glass PP & Nylon.(Brief Article)(Product Announcement)
Antimicrobials Protect Engineering Resins.(RTP Co. in Winona, Minn., has expanded its range of antimicrobial formulations)(Brief Article)
PTT finds first use in plastics. (Your Business In Brief).(polytrimethylene terephthalate)(Brief Article)
New source of MIM compounds. (Keeping up with Materials).(Brief Article)
Compounds tailored for wireless electronics.(Materials)
New TPEs: not slippery when wet.(Materials)

Terms of use | Copyright © 2009 Farlex, Inc. | Feedback | For webmasters | Submit articles