Analog durometer.The Model 501AR e2000 Series analog durometer has been added to the company's line of durometers for rubber, elastomers and other similar materials. This durometer measures hardness with a base diameter In mechanical engineering, the base diameter of an involute gear is the diameter of the base circle.1Notes 1. ANSI/AGMA 1012-G05, "Gear Nomenclature, Definition of Terms with Symbols". of 18 mm (0.71"), conforming to the newly designated ASTM ASTM abbr. American Society for Testing and Materials Type AR requirement. ASTM also states that Type R durometers shall be used in an operating stand, according to according to prep. 1. As stated or indicated by; on the authority of: according to historians. 2. In keeping with: according to instructions. 3. the company. The Model 501AR can be used with the company's Model 472-1 ConstaLoader controlled descent durometer test stand or the Model 478 deadweight test stand. (Pacific Transducer transducer, device that accepts an input of energy in one form and produces an output of energy in some other form, with a known, fixed relationship between the input and output. , 2301 Federal Ave., Los Angeles, CA 90064) Circle 83 on card |
|
||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion