Allied-Gator multi-tool.* Uses the Allied-Gator Power Link and Guide System to increase its force as the jaws close, delivering more force and better jaw alignment when shearing shearing In textile manufacturing, the cutting of the raised nap of a pile fabric to a uniform height to enhance appearance. Shearing machines operate much like rotary lawn mowers, and the amount of shearing depends on the desired height of the nap or pile. or crushing * Modular design In the context of systems engineering, modular design — or "modularity in design" — is an approach aiming to subdivide a system into smaller parts (modules) that can be independently created and then used in different systems to drive multiple functionalities. allows full 360-degree rotation * Knife and anvil anvil Iron block on which metal is placed for shaping, originally by hand with a hammer. The blacksmith's anvil is usually of wrought iron (sometimes of cast iron), with a smooth working surface of hardened steel. cycle at the same rate on the centerline cen·ter·line n. 1. A line that bisects something into equal parts. 2. A painted line running along the center of a road or highway that divides it into two sections for traffic moving in opposite directions, or, in the case of of the tool for more operator control, efficiency, speed and safety * Available in 11 sizes from the MT5 to the MT180 for carriers weighing 5,000 pounds and up * Shear tip features "disposable" wear components * New Speed Circuit technology enhances production by delivering faster cycle times Visit www.alliedgator.com, e-mail info@alliedgator.com or call 800-62-GATOR for more information. [ILLUSTRATION OMITTED] |
|
||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion