Printer Friendly

All-American: radically different from any other Ruger bolt action, the new American is an inexpensive rifle with impressive features.

In the not-so-distant past, before I was old enough to drive and worry about truck payments, I toiled in the hot Georgia sun doing anything that would earn me a buck--for one reason. At summer's end, my shooting buddy and I would pile into a pickup, head to the area's best gun store and lay down every penny we had made on a new rifle or shotgun. I suspect quite a few other kids in rural America did--and still do--the same thing.

Not for a second did I regret seeing my earnings forked over the counter, because they were always spent on a quality firearm. If anything, I was following American tradition. Many a frontiersman watched a whole season of furs go to pay for a fine flintlock flintlock

Ignition system for firearms developed in the early 16th century. It superseded the matchlock and the wheel lock and remained in use until the mid-19th century. The most successful version, the true flintlock, was invented in France in the 17th century.
, and quite a few sharecroppers saved for years for a good bobwhite bobwhite, common name for an American henlike bird of the family Phasianidae, which also includes the pheasant and the partridge. The eastern bobwhite quail (Colinus virginianus) is about 10 in. (25 cm) long.  gun. I still have and use all the rifles, shotguns and handguns bought during those years. After all, we all expect our guns to last.

So the most recent trend in rifles, a product of tough economic times, is to produce something cheap. Needless to say, I am not a big fan of that. Euphemisms such as "affordable" and "inexpensive" appear in the marketing literature when the adjectives "clunky" and "ugly" are more apt in many cases. Lousy triggers and minute-of-pie-plate accuracy seem to be the rule. Manufacturers sigh when someone mentions these shortcomings and ask, "Well, it's an inexpensive rifle. What did you expect?"

[ILLUSTRATION OMITTED]

[ILLUSTRATION OMITTED]

THE ROAD LESS TRAVELED

Ruger, to its credit, chose another route. The designers did not set out to build a cheap rifle, instead they set out to build a very nice rifle that happens to be inexpensive. The new Ruger American is also a departure from the stalwart Model 77. Gone is the investment-cast, controlled-round-feed action with twin, opposing locking lugs and a trigger group that could be politely described as average. The American is a svelte 6(l/2) pounds and has eye-pleasing lines. It functions and shoots as good as it looks.

Last February the rifle was an idea with a price in mind. The bosses locked one manufacturing and three design engineers, all very talented and experienced rifle guys, in a conference room, shoving pizzas and beer under the door, until the first prototype was finished. In only 10 months after getting started, the American was rolling off production lines. But the designers did not set out to build a cheap rifle. Instead they designed it for affordability. There is a difference.

The receiver starts as a length of 4140 chromemoly bar stock. After a few minutes in the mill, it rolls out with slick, angular lines. Ruger is pairing the new receiver with its tried-and-true cold-hammer-forged barrel. Cold-hammer forging is a way to turn out a great barrel quickly. Both are finished with a matte-black oxide finish, and there is no recoil recoil /re·coil/ (re´koil) a quick pulling back.

elastic recoil  the ability of a stretched object or organ, such as the bladder, to return to its resting position.
 lug (1) (Linux Users Group) A formal or informal organization of Linux users who gather together virtually or in person to exchange information and resources. Some groups maintain mailing lists and send out newsletters for their members.  sandwiched between.

Some Ruger diehards might be shocked to find a barrel nut A barrel nut is a type of fastener (nut) which has a barrel-shaped flange and protruding boss that is internally threaded. The boss sits within the components being fastened, and the flange provides the clamping force.  attaching the two, but instead of some huge, knurled lug nut lug nut
n.
A heavy, rounded nut that fits over a bolt, used especially to attach an automotive vehicle's wheel to its axle.
, the small part is barely noticeable. During assembly, a collet grabs the barrel nut and applies the proper torque without marring the part. The nut is a great way to set minimum headspace head·space  
n.
The volume left at the top of an almost filled jar, tin, or other container before sealing.

Noun 1. headspace - the volume left at the top of a filled container (bottle or jar or tin) before sealing
 quickly and efficiently, increasing accuracy. It is a feature common to inexpensive rifles, though Ruger's nut is by far the best looking.

[ILLUSTRATION OMITTED]

A new bedding system replaces the recoil lug and is one of the American's big innovations. Two sets of slots are machined into the underside of the receiver fore and aft fore and aft
adv.
1. Nautical
a. From the bow of a ship to the stern; lengthwise.

b. In, at, or toward both ends of a ship.

2. In or at the front and back.
 of the ejection port are matching, cast stainless steel stainless steel: see steel.
stainless steel

Any of a family of alloy steels usually containing 10–30% chromium. The presence of chromium, together with low carbon content, gives remarkable resistance to corrosion and heat.
 V-blocks set into the molded stock. Since they are molded into the stock, the V-blocks cannot move a micron. Two Allen-head screws secure the action to the blocks, capturing the stock in the process. The result is a steel-on-steel-on-steel system immune to crushing plastic or wood. The company refers to it as "Power Bedding," and it's one of two patented features on the rifle. One side of the V-block has a slight radius to account for manufacturing tolerances and guarantee that the action seats consistently each time the screws are torqued down.

A SENSIBLE PUSH-FEED

Unless you hunt Cape buffalo or elephants on a regular basis, controlled-round feed is overkill overkill Vox populi An excess of anything  in my book, complicating something that should be simple. It is also expensive to manufacture, cast receiver or not. So the American dumps this overwrought o·ver·wrought  
adj.
1. Excessively nervous or excited; agitated.

2. Extremely elaborate or ornate; overdone: overwrought prose style.
 affectation af·fec·ta·tion  
n.
1. A show, pretense, or display.

2.
a. Behavior that is assumed rather than natural; artificiality.

b. A particular habit, as of speech or dress, adopted to give a false impression.
 for a full-bodied, one-piece, push-feed bolt of brushed steel. This eliminates the need to machine or broach broach (broch) a fine barbed instrument for dressing a tooth canal or extracting the pulp.

broach
n.
A dental instrument for removing the pulp of a tooth or exploring its canal.
 raceways in the receiver and is very smooth when cycled. Listening closely to customer preferences, Ruger put three lugs on the bolt head and reduced bolt throw to 70 degrees. A fairly standard plunger-style ejector ejector
(ijektr),
n by common usage, a device used to remove debris and fluids by negative pressure. Another term is
aspirator. See also aspirator.
 and sliding-blade extractor get cartridges in--and out of--the chamber.

One of the big disadvantages of a shorter bolt throw is the increased difficulty in cocking the rifle or "running" the bolt. Engineers were quick to notice this and borrowed a previously thought-of solution--dual cocking cams. This allows shooters to more easily cycle the bolt, even when the rifle is mounted. The smooth bolt handle, by the way, is machine turned, then bent to its final shape. It wears the same matte-black finish as the receiver, a nice contrast to the brushed bolt body.

[ILLUSTRATION OMITTED]

Triggers have always been the Achilles heel of inexpensive rifles--and expensive rifles, for that matter. The new Ruger Marksman adjustable trigger is, frankly, better than most, if not all, stock Model 77 Hawkeye triggers I have tried in the last 20 or so years. Crisp with little travel, the American's trigger is also end-user adjustable with an adjustment range of three to five pounds. Turning a set screw at the front of the trigger body changes the pull weight. Most shooters will be familiar with the small safety blade that protrudes from the trigger's face--just like a Glock or Marlin X7 or Savage AccuTrigger--though Ruger's design locks the trigger, not the sear.

In a tip of the hat to the original Model 77 Mk 1 and customer preference, there is a two-position, top-tang safety just behind the bolt shroud. It is not part of the receiver tang, rather an extension of the trigger housing. The safety does not lock the action, so you can cycle the bolt to empty the chamber while the gun is on "safe." Another nice touch is the left-side bolt release, which lies flush with the receiver until the bolt is pulled all the way rearward rear·ward 1  
adv.
Toward, to, or at the rear.

adj.
At or in the rear.

n.
A rearward direction, point, or position.



rear
.

AESTHETICS, AESTHETICS

The absolute No. 1 way to tell a cheap rifle from a nice rifle at a distance is the stock. The Marlin X7 was the first budget rifle to have a stock that would not embarrass you on the range in front of your friends. The American stock is a beauty queen, too, as beautiful as glass-filled polypropylene can be. Straight-combed with a palm-filling, but elegant pistol grip and integral triggerguard, the stock wears enough stippled finish to stick but not look ugly. A finger shelf runs almost the entire length of the fore-end. Add a recoil pad with just enough give and a red-inlay Ruger phoenix on the pistol-grip cap and you have yourself a damn nice piece of plastic.

[ILLUSTRATION OMITTED]

While blind magazines are more aesthetically pleasing, detachable box magazines sell rifles. The American's magazine is molded from the same material as the stock, flush with the underside radius, and, thank God, does not rattle. A small but easy-to-grab spring-loaded latch snaps into place and holds the magazine close. The rotary design borrows a page from the 10/22 magazine and holds four rounds in standard calibers.

Gone, too, are the proprietary rings, and in their place are four drilled-and-tapped holes that accept No. 46 Weaver bases. Ruger is currently supplying the bases with each rifle.

Every spring, pin, nut and bolt Noun 1. nut and bolt - a fastener made by screwing a nut onto a threaded bolt
bolt - a screw that screws into a nut to form a fastener

fastening, holdfast, fastener, fixing - restraint that attaches to something or holds something in place
 is manufactured in the U.S., hence the rifle's name.

So where are corners cut on this really nice, loaded-with-features rifle? In every single place possible, metal injection molded or plastic parts are utilized, but that is about it. Because the rifle was designed from day one to not use exotic materials or special tooling, no parts are hand fit, and because Ruger plans on making a lot of these rifles and buys parts and hammers out barrels by the truck-load, it is less expensive to manufacture. The genius is streamlining production while improving performance. I see the Power Bedding, Marksman trigger and new receiver as improvements over a Model 77 and at half the price.

[ILLUSTRATION OMITTED]

The finish on some of the parts you cannot see is less than perfect, and where the tang safety, receiver and stock all meet could use some tweaking. Past that, the American is a fine-looking rifle.

And yes, the rifles shoot like a dream. Company officials said every Ruger American is first proofed and then accuracy tested before leaving the factory, though that might change at some point. I have tested two (in.30-06), and both shot sub-MOA with a couple of different factory loads, and the overall accuracy average was every bit as good as other, more expensive rifles.

FIELD TRIALS

I have also hunted whitetail in Texas with the American and love the way the rifle handles. I prefer still hunting to stand hunting, and the American is made for a fellow who likes to hold a rifle in his hands. At a shade over seven pounds with scope, the American is light enough to carry all day but properly balanced. Careful blending of the magazine contours with the stock contours makes it comfortable to carry at the balance point, and there is not a sharp edge or large appendage appendage /ap·pen·dage/ (ah-pen´dij) a subordinate portion of a structure, or an outgrowth, such as a tail.

epiploic appendages  see under appendix .
 to catch on clothing or brush. The rifle does not rattle, something other riflemakers cannot seem to get right. It cycles so smoothly you have to double-check that a round went into the chamber (it always did).

When I shouldered the American and lined up the scope on a mature 5x5 at Picosa Ranch, the American was perfect for the job at hand. As rifles go, the Ruger American is inexpensive, but it delivers where it matters. Then or now, I would not give a second thought to buying one with my hard-earned pay.

See photos and specifications of the guns mentioned in this article and order from an inventory of thousands--all online through Gun Locator. Visit GalleryofGuns.com.

[ILLUSTRATION OMITTED]

[ILLUSTRATION OMITTED]

Ruger American

TYPE: Bolt-action repeater

CALIBER: .243,.308,.270,.30.06 1 (tested)

capacity: 4+1

BARREL LENGTH: 22 in. (cold-hammer forged)

OVERALL LENGTH: 42.5 in.

WEIGHT: 6.25 lbs.

STOCK: Black composite with 1 textured grip and fore-end surfaces

SIGHTS: None, drilled and tapped for supplied scope bases

TRIGGER: Adjustable from 3 to 5 lbs.

MSRP MSRP Manufacturer's Suggested Retail Price
MSRP Message Session Relay Protocol
MSRP Multi-Species Recovery Plan (US Fish & Wildlife Service)
MSRP Member of the Society for Radiological Protection (UK) 
: $449

MAKER: Sturm, Ruger & Co., www.ruger.com.
CHRONO/ACCURACY RESULTS

LOAD                     BULLET         AVERAGE       ES(FPS)  STD.
                      WEIGHT (GR.)  VELOCITY (FPS)             DEV.

FEDERAL FUSIOM PSP             150           2,775       69    27

HORNADY CUSTOM SST             150           2,889       53    22

HORNADYSUPERFORMANCE           165           2,942       24     9
SST

REM. PREMIER ACCUTIP           150           2,857       52    21
BT

WINCHESTER XP3                 180           2,754       65    27

LOAD                    AVERAGE
                      GROUP (IN.)

FEDERAL FUSIOM PSP           0.77

HORNADY CUSTOM SST           0.88

HORNADYSUPERFORMANCE         1.51
SST

REM. PREMIER ACCUTIP         1.25
BT

WINCHESTER XP3               2.07

Accuracy results are the average of five three-shot groups
fired from a benchrest at 100 yards. Conditions were 67
degrees with gusting winds up to 15 mph. Ballistics data
was the average of 10 shots obtained with an Oehler 35P
placed 10 feet from the muzzle.
COPYRIGHT 2012 InterMedia Outdoors, Inc.
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2012 Gale, Cengage Learning. All rights reserved.

 Reader Opinion

Title:

Comment:



 

Article Details
Printer friendly Cite/link Email Feedback
Author:Guthrie, J.
Publication:Guns & Ammo
Date:Apr 19, 2012
Words:1943
Previous Article:Springfield carries it off: at last, an easy-to-pack, single-stack, compact XD. In .45 ACP, no less.
Next Article:The .375 H &H: a celebrating: 100 years of the world's most versatile big-game cartridge.
Topics:

Terms of use | Copyright © 2014 Farlex, Inc. | Feedback | For webmasters