Advanced Power Technology RF 'APT-RF' Announces Next Generation S-Band Transistors at MTT-S Symposium.Business Editors/High-Tech Writers SANTA CLARA Santa Clara, city, Cuba Santa Clara (sän`tä klä`rä), city (1994 est. pop. 217,000), capital of Villa Clara prov., central Cuba. , Calif.--(BUSINESS WIRE)--June 4, 2003 Addition of S-Band Verifies Commitment to the Future of Radar Markets Advanced Power Technology RF (Nasdaq:APTI APTI Association for Preservation Technology International APTI Air Pollution Training Institute ), a leading supplier of silicon power transistors for radio frequency (RF) and microwave applications, is announcing the first in its series of next generation of S-Band transistors. This new product utilizes newer chip designs and processing enhancements to offer performance improvements, notably in power gain and gain flatness over the frequency range. Products and data will be shown during the MTT-S MTT-S Microwave Theory and Techniques Society (IEEE) Symposium in Philadelphia. APT-RF is developing a full family of S-Band transistors and has generated a library of transistor die to cover the applications from 2.7 to 3.4 GHz at the key pulse widths and power levels. All of the transistors use Gold Topside metallization Met`al`li`za´tion n. 1. The act or process of metallizing. and Gold Wires. In support of the development of the final transistors we have established the capability to perform Pulsed Load Pull Analysis on the transistor structure to obtain the data which is used to establish the optimum internal matching networks. This information is then used with EM Simulation to generate the final test fixtures. The resulting transistors offer improved performance over the operating band -- resulting in flatter power gain and higher overall power gain and efficiency. The 2729-125 is rated with an input power of 15.8 Watts to provide a minimum power output of 125 Watts -- power gain in excess of 9.0 dB ... Allowing the user to reduce the requirements on the driver and predriver. "Customers turn to APT-RF for our application-specific designs and ability to deliver transistors that meet the design criteria Noun 1. design criteria - criteria that designers should meet in designing some system or device; "the job specifications summarized the design criteria" criterion, standard - the ideal in terms of which something can be judged; "they live by the standards of their of their circuits," said Mike Mallinger, Vice President of APT-RF. "Our next generation S-Band transistors give us a foundation to create a family of devices for a full range of S-Band radar applications, not only for 2.7 to 2.9 GHz but up through 3.5 GHz over the next year. These new designs, coupled with our automated assembly and test will provide customers with an assured source of supply providing the most consistent and reproducible product on the market for S-Band Radar." Price and Availability Small volume pricing (1-24 pieces) for 2729-125 is $359.04. Product availability is 6-12 wks, or sooner pending stock. Transistor data sheets and test circuit layout can be downloaded from the web site or obtained from the factory. APT-RF is a leading supplier of RF and microwave silicon power transistors with offices located in Santa Clara, California Santa Clara, California (IPA: /ˌsæntəˈklærə/) , founded in 1777 and incorporated in 1852, is a city in Santa Clara County, in the U.S. state of California. and Montgomeryville, Pennsylvania Montgomeryville is a census-designated place (CDP) in Montgomery County, Pennsylvania, United States. The population was 12,031 at the 2000 census. Geography Montgomeryville is located at (40.250388, -75. . Other operations include Advanced Power Technology, Bend, Oregon Bend is a city in Deschutes County, Oregon, United States. The name Bend was derived from "Farewell Bend," the designation used by early pioneers to refer to the location along the Deschutes River where the town eventually was platted, one of the few fordable points along the , a leading supplier of high voltage The term high voltage characterizes electrical circuits, in which the voltage used is the cause of particular safety concerns and insulation requirements. High voltage is used in electrical power distribution, in cathode ray tubes, to generate X-rays and particle beams, to , high power MOSFETs, IGBTs, Ultra-Fast Recovery and Schottky Diodes and Advanced Power Technology Europe, Bordeaux, France, a leader in standard and Applications Specific Power Modules (ASPMs(R)). For more information, contact APT-RF at 3000 Oakmead Village Drive, Santa Clara, California 95051 Phone: 408/986-8031 Fax: 408/986-8120 Email: csrfca@advancedpower.com Visit our web site at www.advancepower.com |
|
||||||||||||

Printer friendly
Cite/link
Email
Feedback
Reader Opinion