Printer Friendly
The Free Library
22,728,960 articles and books

Additional die lube availability.



The Low Volume Spray System--LVSS--is designed for metalforming die lubrication lubrication, introduction of a substance between the contact surfaces of moving parts to reduce friction and to dissipate heat. A lubricant may be oil, grease, graphite, or any substance—gas, liquid, semisolid, or solid—that permits free action of . The LVSS can lubricate lu·bri·cate  
v. lu·bri·cat·ed, lu·bri·cat·ing, lu·bri·cates

v.tr.
1. To apply a lubricant to.

2. To make slippery or smooth.

v.intr.
To act as a lubricant.
 parts and tooling with unique requirements or those needing more lube than the coil stock lubrication process provides. The scalable, programmable system provides control of air and fluid applied to metalforming dies. The SPR spr Spring
SPR Strategic Petroleum Reserve
SPR Surface Plasmon Resonance
SPR Suomen Punainen Risti
SpR Specialist Registrar (UK doctor who supports a consultant)
SPR Society for Psychical Research
SPR Stop Prisoner Rape
 2000 Programmable Lubrication Station is used to control the sequencing, duration, and frequency of nozzle actuation ac·tu·ate  
tr.v. ac·tu·at·ed, ac·tu·at·ing, ac·tu·ates
1. To put into motion or action; activate: electrical relays that actuate the elevator's movements.

2.
 for the LVSS. The system can be programmed with up to 250 job setups. Fluid and air volumes are managed using separate needle valves located on the nozzle, providing control to direct the right amount of fluid to the desired surface. Unist

[ILLUSTRATION OMITTED]

www.rsleads.com/705mn-232 or Circle 232 for more information
COPYRIGHT 2007 Nelson Publishing
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2007 Gale, Cengage Learning. All rights reserved.

 Reader Opinion

Title:

Comment:



 

Article Details
Printer friendly Cite/link Email Feedback
Title Annotation:NEW PRODUCTS AND LITERATURE
Publication:Modern Applications News
Date:May 1, 2007
Words:118
Previous Article:Lock out moisture and corrosion with an odorless coating.
Next Article:Feature attraction: a "feature" by any other name may be machined as neat. Before a discussion of "feature recognition" can take place, there has to...
Topics:



Related Articles
LHS grease fittings.
Shooting down rumors.
Lack of lube for M1114 tie rod can lead to failure!
Bearings take a beating without lube.

Terms of use | Copyright © 2014 Farlex, Inc. | Feedback | For webmasters