Adding cost effective flexibility: new MD Series now available in multi-temp.The new MD range, Thermo King's cost effective solution for temperature-controlled trucks from 6 to 7.5 metres long, is now more flexible, with the addition of multi-temperature capability. The MD-200 and MD-300, launched in July 2003, are designed with simple, cost effective, reliable operation in mind, featuring improved fuel efficiency, better performance and more environmentally friendly Environmentally friendly, also referred to as nature friendly, is a term used to refer to goods and services considered to inflict minimal harm on the environment.[1] operation than similar diesel powered units. The MD-200 is now available as a multi-temperature system, the MD-200 MT, able to cater for two zones in lane or compartment configuration, giving operators the flexibility to carry frozen and chilled or fresh products in the same load. Using the advanced SPECTRUM[TM] S-2 remote evaporator evaporator Industrial apparatus for converting liquid into gas or vapour. The single-effect evaporator consists of a container or surface and a heating unit; the multiple-effect evaporator uses the vapour produced in one unit to heat a succeeding unit. , the system provides greater airflow to ensure accurate temperature management in each zone, even in fully loaded compartments. The new MD series consumes significantly less fuel than comparable competitive products. With fuel consumption contributing approximately 40% of the total life cost of a temperature control system, this could lead to substantial savings over the working life of the vehicle. Operating costs operating costs npl → gastos mpl operacionales are kept to a minimum with the MD series' innovative design to minimize maintenance requirements. Like the existing MD range, the new MD-200 MT comes with Thermo King's Extended Maintenance Interval package, EMI (ElectroMagnetic Interference) An electrical disturbance in a system due to natural phenomena, low-frequency waves from electromechanical devices or high-frequency waves (RFI) from chips and other electronic devices. Allowable limits are governed by the FCC. 2000. Using a combination of high quality filters and fluids, oil change intervals are increased to 2000 hours of operation, and coolant maintenance Coolant maintenance is the maintenance of metalworking fluid. Most machine shop operators think of metalworking fluids (MWF, or coolant) as a necessary nuisance, something that blows chips off the part. intervals to 12,000 hours. Operators benefit from reduced paris and labour costs while creating less environmental impact through a reduction in waste materials. The TG-V in-cab controller is provided as standard and easily fits in the dashboard (1) See Mac Dashboard. (2) A software-based control panel for one or more applications, network devices or industrial machines. Dashboards display simulated gauges and dials that look somewhat like an automobile dashboard. to offer sale, convenient control and monitoring of temperatures in both compartments simultaneously. The new MD-200 MT also features a new stylish look designed for ease of maintenance, giving rapid and full access to the engine compartment, saving time and money in service operations. The unique exterior design allows individual panels to be removed and replaced instead of the entire skin. For urban operation in noise-sensitive areas, the Low Decibel decibel (dĕs`əbĕl', –bəl), abbr. dB, unit used to measure the loudness of sound. It is one tenth of a bel (named for A. G. Bell), but the larger unit is rarely used. Sound Reduction System is offered as an option. Using special noise abatement A reduction, a decrease, or a diminution. The suspension or cessation, in whole or in part, of a continuing charge, such as rent. With respect to estates, an abatement is a proportional diminution or reduction of the monetary legacies, a disposition of property by will, when components and insulation materials, the system reduces noise emissions substantially. The outstanding success of the single temperature MD-200 and MD-300 since their introduction one year ago is sure to be repeated with the extension of the range into multi-temperature operation. Contact Thermo King Total Kare Ltd on tel: +353 917 512 31 or visit www.thermoking.com |
|
||||||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion