Printer Friendly
The Free Library
19,573,962 articles and books
Member login
User name  
Password 
 
Join us Forgot password?

ADVISORY/AmmoCore Engineer to Receive Best Paper Award at DAC.


Business Editors/High-Tech Writers

ADVISORY...For Tuesday (June 8)

Design Automation Conference 2004

--(BUSINESS WIRE)

What: Viktor Lapinskii, senior software engineer with AmmoCore Technology, Inc., will receive "Best Paper" honors for a paper that he co-wrote for the journal "ACM Transactions on Design Automation of Electronic Systems (TODAES TODAES Transactions on Design Automation of Electronic Systems )" as part of his dissertation while at the University of Texas. The award will be presented by Bob Walker, the ACM SIGDA SIGDA Special Interest Group on Design Automation  chair, during the opening session of the Design Automation Conference.

Lapinskii co-wrote the paper "Cluster Assignment for High-Performance Embedded VLIW Processors" with Margarida F. Jacome, associate professor, Electrical and Computer Engineering Department, at the University of Texas at Austin “University of Texas” redirects here. For other system schools, see University of Texas System.
The University of Texas at Austin (often referred to as The University of Texas, UT Austin, UT, or Texas
, and Gustavo A. De Veciana, professor, Electrical and Computer Engineering Department, at the University of Texas at Austin.

For more information about the paper, please visit: http://portal.acm.org/citation.cfm?id=567274&dl=ACM&coll=portal

The trio has collaborated in the past to earn honors. At the 2000 International Conference on Computer-Aided Design The International Conference on Computer-Aided Design, or ICCAD, is a yearly conference about electronic design automation. It is normally held in early November in San Jose, California.  (ICCAD), they were presented the IEEE Bill McCalla Best Paper Award for their paper, "Exploring Performance Tradeoffs for Clustered VLIW ASIPs."

When/where: The award will be presented on Tuesday, June 8, at the Design Automation Conference in San Diego, California “San Diego” redirects here. For other uses, see San Diego (disambiguation).
San Diego is a coastal Southern California city located in the southwestern corner of the continental United States. As of 2006, the city has a population of 1,256,951.
, at the San Diego Convention Center The San Diego Convention Center is the main convention center for the city of San Diego, California. It is located in the Marina district of downtown San Diego near the Gaslamp Quarter, at 111 West Harbor Drive. , Ballroom 20ABC ABC
 in full American Broadcasting Co.

Major U.S. television network. It began when the expanding national radio network NBC split into the separate Red and Blue networks in 1928.
, during the Opening Session. The Opening Session and Keynote begin at 8:30am.

About AmmoCore Technology Inc. (DAC See D/A converter and discretionary access control.

DAC - Digital to Analog Converter
 Booth #4720)

AmmoCore Technology develops and licenses Fabrix software for the physical design implementation of complex deep sub-micron SoCs. Fabrix is based on AmmoCore's patented SuperFlat(TM) software architecture. It is an integrated design flow that allows chip designers to go from netlist to GDSII in substantially less design time while providing a high level of confidence in design closure early on in the design cycle. Fabrix consists of three technology components: RapidPlanner(TM), RapidPredicter(TM) and RapidImplementer(TM). Together they enable design teams to improve overall performance in chip design, reduce cost and accelerate time to market. The company is headquartered at 2101 Tasman Drive, Suite 200A, Santa Clara, CA 95054. The company is privately held. For further information on AmmoCore, please visit the company's website at www.ammocore.com or call 408-748-4000.

Note to editors: AmmoCore, the AmmoCore logo, SuperFlat, Fabrix, SBlock, RapidPlanner, RapidPredicter, and RapidImplementer are registered trademarks or trademarks of AmmoCore Technology, Inc. All others are the property of their respective holders.
COPYRIGHT 2004 Business Wire
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2004, Gale Group. All rights reserved. Gale Group is a Thomson Corporation Company.

 Reader Opinion

Title:

Comment:



 

Article Details
Printer friendly Cite/link Email Feedback
Publication:Business Wire
Geographic Code:1USA
Date:May 19, 2004
Words:398
Previous Article:IBSN Offers Order Routing Gateway to OM's CLICK XT; Route FIX or CMS Orders to OM's CLICK XT Trading System Quickly and Painlessly.
Next Article:Danka Announces Issuance of Participating Shares.



Related Articles
The Art and Science of Avoiding the Dissertation.
In memoriam.
Awards & recognition.
FSCT announces Officer and Board nominations; Elections to be held October 26.
Fritz H. Walker, installed as FSCT president; 2004-2005 officers and board announced.
2003 Roy W. Tess Award.
Process and Product Quality Division.
Benchmark media systems DAC 1.
Dr. David Rich on DACs, including the one used in the DVD-S1500.
Tectonic sweeps up ACEC awards.

Terms of use | Copyright © 2012 Farlex, Inc. | Feedback | For webmasters | Submit articles