5-axis machining center.The SuperMILLER 400 5-axis integrated machining center is designed to produce parts in a single setup. Its multitasking multitasking Mode of computer operation in which the computer works on multiple tasks at the same time. A task is a computer program (or part of a program) that can be run as a separate entity. ability dramatically reduces overall part processing time and increases part accuracy when compared to using separate milling and turning machines. The SuperMILLER 400 can accommodate workpieces up to 15.7" x 15.7" long. In turning mode, the table can rotate up to 1,500 rpm around the A-axis. Standard maximum spindle spindle: see spinning. A rotating shaft in a disk drive. In a fixed disk, the platters are attached to the spindle. In a removable disk, the spindle remains in the drive. Laptops use spindle designations to indicate the number of built-in drives. speed of 12,000 rpm can be reached in 1.3 seconds; deceleration deceleration /de·cel·er·a·tion/ (de-sel?er-a´shun) decrease in rate or speed. early deceleration occurs in 2.3 seconds. Also standard is a 30-tool capacity magazine, which allows for tool change time of 3.8 seconds chip-to-chip. Self-lubricated linear guides direct movement along the X, Y, and Z axes, moving at a top speed of 1,772 ipm. Mori Seiki [Mori Seiki - The Machine Tool Company -] [1] is a Japan-based company primarily engaged in the manufacture and sale of machine tools. It was established in 1948 and is headquartered in Nagoya City, Japan. USA Inc., www.rsleads.com/ 506tp-225 [ILLUSTRATION OMITTED] |
|
||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion