40 YEARS AGO.Drilling Wide Panels BY SUSPENDING a 17-inch drill press -- which in its normal position has capacity to drill to the center of a 17-inch panel -- from an angle iron wall bracket Noun 1. wall bracket - a support projecting from a wall (as to hold a shelf) bracket angle iron, angle bracket - an L-shaped metal bracket console - an ornamental scroll-shaped bracket (especially one used to support a wall fixture); "the bust of over a table, S & S Visual Co., Brooklyn Brooklyn (br  k`lĭn), borough of New York City (1990 pop. 2,300,664), 71 sq mi (184 sq km), coextensive with Kings co., SE N.Y. , NY, can
drill panels of any width. A multiple spindle spindle: see spinning. A rotating shaft in a disk drive. In a fixed disk, the platters are attached to the spindle. In a removable disk, the spindle remains in the drive. Laptops use spindle designations to indicate the number of built-in drives. attachment, with extension spindles on either side, permits drilling up to 15 holes in a 35-inch line simultaneously. Up to 200 panels are drilled per day using the setup See BIOS setup and install program. . Stacking panels so that holes can be drilled through several at a time increases productivity further. |
|
||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion