... But just remember this.[ILLUSTRATION OMITTED] Wear LSD LSD or lysergic acid diethylamide (lī'sûr`jĭk, dī'ĕth`ələmĭd, dī'ĕthəlăm`ĭd), alkaloid synthesized from lysergic acid, which is found in the fungus ergot ( (electrostatic discharge) protection when handling circuit cards. Some of the Sentinel circuit cards cost thousands and thousands of dollars. Just one tiny spark of ESD (1) (Electronic Software Distribution) Distributing new software and upgrades via the network rather than individual installations on each machine. See ESL. can ruin one of those cards and your future in your unit. Before you handle any circuit card, put on an ESD wrist strap and plug it in. Make sure the Sentinel is properly grounded or the ESD strap won't do you much good. Never put circuit cards down on metal. Lay cards down on an ESD mat or place them in an antistatic pouch. NSN NSN National Stock Number NSN Nokia Siemens Networks NSN National Storytelling Network NSN NATO Stock Number NSN New Substances Notification (CEPA) NSN National Student Number (NZ) NSN Never Say Never 4940-t11-253-5368 brings an ESD kit with two wrist straps, a grounding cord, mat, three antistatic pouches, and three barrier bags. For more info on ESll, see page 40. [ILLUSTRATION OMITTED] Keep the eccentric plate. If you turn in the azimuth azimuth (ăz`əməth), in astronomy, one coordinate in the altazimuth coordinate system. It is the angular distance of a body measured westward along the celestial horizon from the observer's south point. drive motor for repair or replacement, don't turn in the eccentric plate, which is the mounting bracket for the motor. The plate has a serial number and is meant to stay with the Sentinel it came with. Check the leveling leg handle during weekly PMCS PMCS PMC Sierra (stock symbol) PMCS Project Management Control System PMCS partial mission-capable, supply (US DoD) PMCS Preventive Maintenance Checks & Services PMCS Professional Military Comptroller School . Crewmembers have a bad habit of using the handle as a step. If the handle gets out of alignment, it starts hitting the retaining arm and that damages the crank handle. Soon you can't adjust the leveling leg. [ILLUSTRATION OMITTED] |
|
||||||||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion