[check] Dealer inquiries invited Dump-Pro with Hi-Sides.The patented Dump-Pro is a lightweight (400-432 lbs.) unit that enables a user to turn a pick-up into a dump truck in minutes. The unit's dump body is made of industrial weight polyethylene, and the drive system requires no expensive hydraulics hydraulics, branch of engineering concerned mainly with moving liquids. The term is applied commonly to the study of the mechanical properties of water, other liquids, and even gases when the effects of compressibility are small. to operate. The user just releases the clamping system, disconnects the power, removes one hitch bolt and slides the unit out to make the pick-up ready for other uses. The optional Hi-Sides increase the carrying capacity carrying capacity the number of animal units that a farm or area will carry on a year round basis, including that needed for conservation of winter feed. Usually stated as dry cows or dry sheep equivalents per hectare. from 2 cubic yards to 4 or 5 cubic yards. The hardware is added to user supplied and finished 3/4" plywood plywood, manufactured board composed of an odd number of thin sheets of wood glued together under pressure with grains of the successive layers at right angles. Laminated wood differs from plywood in that the grains of its sheets are parallel. . The unit is designed to "float" and automatically adjust to variations of ambient temperature Outside temperature at any given altitude, preferably expressed in degrees centigrade. . Dump-Pro with Hi-Sides is available in assembled or kit form. Demo video and specs (SPECificationS) The details of the components built into a device. See specification. are available on the Internet. Dealer inquiries are invited. Standard Hamilton Company, Inc., 1648 Taylor Road #514, Port Orange, FL 32128-6753; tel: 386-763-3333 / 866-438-6777; fax: 386-756-4444, sales@standardhamilton.com; www.standardhamilton.com. |
|
||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion